|
|
 |
| ELITE 112 |
To respond to the growing needs of the micromechanical market, IEMCA has developed a bar feeder that is totally innovative in terms of performance, flexibility and simplicity.
The Elite 112 is able to feed bars of 0.8 mm to 12.7 mm even on lathes with very high rotation and headstock acceleration speeds without limiting performance in any way.
HIGH ROTATION SPEEDS
The use of closed, calibrated, round section channels and high performance rotating assemblies, plus the development of special low inertia components enable the Elite 112 to function easily with even the fastest spindles.
HEADSTOCK FOLLOWING
The Elite 112 boasts a minimum inertia (- 40%) mechanical synchronisation system to ensure precision following of headstocks - even those actuated by linear motors - no matter how small the bars.
FLEXIBILITY
Retooling time for the Elite 112 is only 4 minutes thanks to the use of quick-fit channels.
SIMPLE TO USE
The Elite 112 does not need any special adjustments to change work or to work with thin bars. This is because the Elite 112 has a library of default configurations pre-programmed into its operator panel.
SELECTING THIN BARS
Excellent reliability in selecting thin bars is ensured by a stepping action magazine. |
|
| Technical specification |
| Round bars |
Ø 0.8 - 12.7 mm (1/32" - 1/2") |
| Hexagonal bars |
Ø 1 - 11 mm (3/64" - 7/16") |
| Magazine capacity |
28 bars Ø 7.5 mm - 16 bars Ø 12.7mm |
| Bar changing time |
26 sec.(for 3200 mm bars) mod.32 |
| Feed speed (max) |
1000 mm/sec. |
| Return speed (max) |
1600 mm/sec. |
| Operating voltage |
230/400 V |
| Total power required |
1,8 KW |
| Compressed air |
6 bar |
|
|
Elite 112
